Engineers pioneer use of 3D printer to create new bones
Published: 30th Nov 2011 14:10:51
A 3D printer is being used to create "bone-like" material which researchers claim can be used to repair injuries.
The engineers say the substance can be added to damaged natural bone where it acts as a scaffold for new cells to grow.
It ultimately dissolves with "no apparent ill-effects", the team adds.
The researchers say doctors should be able to use the process to custom-order replacement bone tissue in a few years time.
Prof Susmita Bose helped carry out the work at Washington State University and co-authored a report in the Dental Materials journal.
"You can use the bone-like ceramic powder as a feed material and it can make whatever you draw on the computer," she says.
"It is mostly [suitable for] low load bearing applications. However, what we are trying to develop is the controlled degradation... of these scaffolds where as the scaffold dissolves in the body the bone tissue grows over it."
Prof Bose's team have spent four years developing the bone-like substance.
Their breakthrough came when they discovered a way to double the strength of the main ceramic powder - calcium phosphate - by adding silica and zinc oxide.
To create the scaffold shapes they customised a printer which had originally been designed to make three-dimensional metal objects.
It sprayed a plastic binder over the loose powder in layers half as thick as the width of a human hair.
The process was repeated layer by layer until completed, at which point the scaffold was dried, cleaned and then baked for two hours at 1250C (2282F).
Tests carried on immature foetal bone cells in the laboratory found that new bone cells started growing over the scaffold within the first week of it being attached.
The team say they have also had promising results from tests involving live rabbits and rats.
"The way I envision it is that 10 to 20 years down the line, physicians and surgeons should be able to use these bone scaffolds along with some bone growth factors, whether it is for jaw bone fixation or spinal fusion fixation," says Dr Bose.
This is not the first time that orthopaedic experts have investigated the use of 3D printers.
Earlier this year a surgical trainee at Scotland's Monklands hospital detailed a technique to produce bone replicas using the technology.
Mark Frame suggested using a CAT scanner to produce images of damaged bones.
He said the data could then be fed into a 3D printer to create a model to help doctors plan their surgery.
He said the process cost about a tenth of traditional techniques.
At 17:02:44 in EnglandTwelve new victims have made allegations of child sexual abuse in Rotherham since a report found at least 1,400 children were abused, police say.
At 17:02:03 in ScotlandPolice have appealed for help in tracing a woman and three children from the Pollok area of Glasgow who have been missing for the past week.
At 16:59:50 in HeadlinesFour UN peacekeepers have been killed and 15 injured by a landmine in northern Mali.
At 16:52:29 in HealthA global military intervention is needed to curb the largest ever Ebola outbreak, according to the medical charity Medecins Sans Frontieres.
At 16:50:46 in Northern IrelandA 20-year plan has been proposed to improve education in the area with the worst attainment record in Belfast.
At 16:50:13 in EnglandA man has been found guilty of bombarding a Labour MP with abusive messages on Twitter after she supported a feminist campaign.
At 16:46:49 in EnglandA major road improvement scheme has been delayed by more than a month because damage is worse than previously thought.
At 16:45:30 in SportIndia sent England to a humiliating nine-wicket defeat to win the fourth one-day international at Edgbaston and the five-match series 3-0.
At 16:44:45 in ScotlandEdinburgh City Council is examining ways to make a church bell quieter after learning it exceeds World Health Organisation night-time noise limits.
At 16:34:32 in Northern IrelandA court has ordered Irish police to apprehend a 16-year-old boy who had absconded from hospital.
Harvard CitationBBC News, 2011. Engineers pioneer use of 3D printer to create new bones [Online] (Updated 30th Nov 2011)
Available at: http://www.ukwirednews.com/news/206639/Engineers-pioneer-use-of-3D-printer-to-create-new-bones [Accessed 2nd Sep 2014]
News In Other Categories
A diver who died following an incident at a disused Gwynedd quarry has been named.
South Yorkshire Chief Constable David Crompton is appearing before a MPs to answer questions about a search of Sir Cliff Richard's house.
With the doors to its brand new £1million training centre officially open, one of the UK's leading apprentice training providers, Bristol based S&B Automotive Academy, is showcasing its world-class facilities by launching a series of foreign student exchanges for the first time in its 41-year history. To get a flavour of what life is like as an apprentice in the UK, the Academy hosted 16 apprentice engineers and bus drivers from the G9 Automotive College in Hamburg, Germany, as part of a Europe-wide vocational training initiative called the ‘Leonardo Programme’ with support from the European Social Fund. In a reciprocal arrangement, S&B will be sending nine apprentices to Germany during February 2012 so that they can get an appreciation of life in the automotive industry on the Continent. A further three German exchange groups are being planned for next year. Designed to assist the development of vocational skills and training across Europe, including work placements for trainees, the Leonardo Programme has a budget of €1.75bn, which is helping to encourage UK organisations to work with their counterparts abroad. In what is expected to be another challenging year for employers in the UK automotive sector, S&B’s Chief Executive, Jon Winter, claims that the exchange initiative will bring many benefits to the Academy and its apprentices: “In a world of global automotive brands, it’s important for our learners to understand the international context of the industry they have chosen to make their career. This new exchange programme will enable apprentices and Academy staff alike to achieve a better understanding of the challenges and opportunities within the automotive arena in Europe. With the Academy’s influence also extending to the USA and Asia, there’s every possibility that this initiative could move further afield in the future.” Continued Winter: “The need for skilled technicians across the world is on the increase and we actively encourage our apprentices to look at broader horizons during their training. Many of them have already learned the phrase ‘Vorsprung durch Gelehrtheit’, quite simply, ‘Advancement through learning.” In the 2010/11 academic year, S&B doubled the number of successful Apprenticeships over the previous year with some 350 apprentices graduating from the Academy. At the same time, achievement levels reached an all-time high with an overall success rate of 85%. For those learners on the Advanced Apprenticeship three-year programme, success rates were even higher, at over 98%. PHOTO CAPTION: As part of their exchange visit, S&B Automotive Academy arranged for the German apprentices to visit Hampshire bus operator, Bluestar, at its Barton Park depot. The students are pictured with S&B’s Andy West (3rd right) and Steve Prewett, Bluestar’s Area Engineering Manager (2nd right). Ends http://www.sandbaa.com
A man has been found guilty of bombarding a Labour MP with abusive messages on Twitter after she supported a feminist campaign.