02/Sep/2014 - Last News Update: 14:06

Bloodhound diary: Uplifting news for six-tonne supercar


Published: 27th Jul 2012 17:28:39

A British team is developing a car that will capable of reaching 1,000mph (1,610km/h). Powered by a rocket bolted to a Eurofighter-Typhoon jet engine, the Bloodhound SSC (SuperSonic Car) vehicle will mount an assault on the land speed record. Wing Commander Green is writing a diary for the BBC News website about his experiences working on the Bloodhound project and the team's efforts to inspire national interest in science and engineering.

The aerodynamic refinement of the world's first 1,000mph car continues. The computational fluid dynamics work at Swansea University is giving us more data on the (now-fixed) shape of Bloodhound.

Firstly, the good news. The "Configuration 12" shape is producing exactly the right amount of lift - almost none.

Any significant lift is obviously unacceptable, as the car would fly. Significant downward force, like that in a racing car, is not much better - at 1,000mph it will be so high that the suspension will be hugely overloaded.

So it's a big relief that Config 12 produces no major changes of load on either the front or rear wheels, at any speed from "very slow" (<200 mph) to "very fast" (1,000mph+).

This is a terrific achievement by aerodynamicist Ron Ayers, working with Dr Ben Evans and the Swansea University team. In my opinion, it's perhaps one of the most impressive technical achievements of the whole project - and it means that the car will stay on the ground at all speeds.

After five years of work, we're confirming that we have a fundamentally safe design. Speaking as the driver, this is great news!

Now to the not-quite-so-good news.

While the lift is impressively low, the drag for Config 12 is slightly higher than our target. To get to 1,000mph, we need the "drag coefficient" - which is a measure of the drag per unit area of the car - to be a maximum of 1.3.

The Config 12 shape, as it stands, has a drag coefficient of 1.4 at maximum speed. So does this excess drag mean that we can't reach 1,000mph? No - but we will have to refine the design to reduce it a little.

Current options are to make the top half of the fin slightly thinner, and improve the wheel fairings. Little tweaks here and there can make a huge difference to the final result - ask any F1 team - so that's the process we're starting now. For a light-hearted view on drag, have a look at our latest Cisco BHTV episode.

The other thing to remember is that this is still a computer model, and this prediction may be a few percent more or less than the true figure.

We won't know the exact numbers until we get to the desert in South Africa next year and take the car supersonic. If the drag is a little too high at that point, then we have time to make further refinements before the "very high speed" (1,000mph) runs in 2014.

The drag target of 1.3 also assumes a rocket thrust of 122kN (27,000lb). We're now in the process of verifying this figure, with the first high-test peroxide (HTP) firing of the monopropellant rocket motor due in the next few days.

This is Part 1 of getting the rocket thrust - proving that our Cosworth F1 engine can pump enough HTP through the silver oxide catalyst pack. Pumping nearly 40 litres per second at 76 Bar (over 1,000psi) is a huge task - which is why we need a Cosworth F1 engine as a pump motor, of course.

Part 2 of the testing, the hybrid rocket firing to produce the full 122kN of thrust, will come later this year, and we aim to do it live on the internet - we'll let you know when!

Work continues on the wheel brakes package, for both the UK runway tests and the desert runs. Current figures indicate that the carbon/carbon runway brakes will be able to absorb the energy of the car from 160mph - but that does not allow for aerodynamic drag.

Add the extra drag from the airflow, and the brakes will probably be good for at least 200 mph, which is great news, as it will let us test full power on the runway before we go to the desert.

Once out in South Africa, we will replace the carbon brake discs with steel discs, which are strong enough to survive the huge loads of spinning at over 10,000 rpm, but will probably be limited to a safe maximum 'brakes on' speed of about 100 mph.

That should be fine - nearly all the braking is done by the airbrakes and parachutes on the desert.

The chassis build of Bloodhound continues to go well. Hampson are pressing on with assembly of the lower chassis, while Umeco is starting to produce moulds that look like the front end of the car.

Hyde is still refining the fin structure, which will include a "bullet" fairing along the top. This will house the video cameras that are going to relay live video pictures from the car every time we run.

We've also hit over 12,000 names on the fin now - with more room still available if you want your name to travel at 1,000mph.

It's a busy time of year for public engagements, with our Show Car out on the road at a number of Bloodhound events.

The public's interest at the Goodwood Festival of Speed was a high as I've ever seen it, and we were also approached by some potential new sponsors at Goodwood (which is always nice!) - they were clearly impressed by the huge public interest in the project.

During the weekend, I joined Bloodhound rocket expert Daniel Jubb to present at the Goodwood schools event, and I also got a chance to drive the new Noble M600 - a 650-horsepower road car is a great way to do the Goodwood hill climb!

I'm doing some more driving in the Bloodhound Radical, as part of my training for 1000mph.

The Radical made a static appearance at the Festival of Speed, but has since been on the Goodwood race circuit this month - our thanks to the circuit team for letting me show some (quite nervous-looking) journalists why track training is useful training for me.

We were also at the Royal International Air Tattoo at Fairford this month, watching the world's largest military air show. Bloodhound was sharing (OK, mostly dominating) the education zone, which was enthusiastically staffed by the Air Training Corps.

As well as promoting their great range of activities, they had around 600 cadets helping out with the organisation of the event (and able to enjoy a free air show in the bargain). If this group represents the future of the Royal Air Force, then it looks to be in good hands!

With the car coming together month by month, I'm starting to think about the track in South Africa more often.

There's good news from the Northern Cape team this month, as they have now finished clearing the main track (all 10 million square metres of it), so I'm off to South Africa next week to see how they got on.

I'm also going to meet up with the South African Motor Sports Association, who will be officiating for all our record attempts.

The last time a World Land Speed Record was attempted in South Africa was by Malcolm Campbell in 1929, so this is not something they do very often.

It's something that they are determined to do well though - and with the Northern Cape team now finishing off the world's best race track, it's getting closer all the time.

BBC News External Link Show Citation

Latest News

Harvard Citation

BBC News, 2012. Bloodhound diary: Uplifting news for six-tonne supercar [Online] (Updated 27th Jul 2012)
Available at: http://www.ukwirednews.com/news/1443171/Bloodhound-diary-Uplifting-news-for-six-tonne-supercar [Accessed 2nd Sep 2014]

News In Other Categories

  • Celebrity hacks: How to protect yourself in the cloud

    The release of hundreds of intimate images of celebrities has raised questions about the security of the online services used to share many of the snaps.
  • Scottish independence: Campaign donation figures released

    More than £250,000 was donated in the last month to groups campaigning in the Scottish independence referendum.
  • Bristol Academy extends reach overseas with first foreign students

    With the doors to its brand new £1million training centre officially open, one of the UK's leading apprentice training providers, Bristol based S&B Automotive Academy, is showcasing its world-class facilities by launching a series of foreign student exchanges for the first time in its 41-year history. To get a flavour of what life is like as an apprentice in the UK, the Academy hosted 16 apprentice engineers and bus drivers from the G9 Automotive College in Hamburg, Germany, as part of a Europe-wide vocational training initiative called the ‘Leonardo Programme’ with support from the European Social Fund. In a reciprocal arrangement, S&B will be sending nine apprentices to Germany during February 2012 so that they can get an appreciation of life in the automotive industry on the Continent. A further three German exchange groups are being planned for next year. Designed to assist the development of vocational skills and training across Europe, including work placements for trainees, the Leonardo Programme has a budget of €1.75bn, which is helping to encourage UK organisations to work with their counterparts abroad. In what is expected to be another challenging year for employers in the UK automotive sector, S&B’s Chief Executive, Jon Winter, claims that the exchange initiative will bring many benefits to the Academy and its apprentices: “In a world of global automotive brands, it’s important for our learners to understand the international context of the industry they have chosen to make their career. This new exchange programme will enable apprentices and Academy staff alike to achieve a better understanding of the challenges and opportunities within the automotive arena in Europe. With the Academy’s influence also extending to the USA and Asia, there’s every possibility that this initiative could move further afield in the future.” Continued Winter: “The need for skilled technicians across the world is on the increase and we actively encourage our apprentices to look at broader horizons during their training. Many of them have already learned the phrase ‘Vorsprung durch Gelehrtheit’, quite simply, ‘Advancement through learning.” In the 2010/11 academic year, S&B doubled the number of successful Apprenticeships over the previous year with some 350 apprentices graduating from the Academy. At the same time, achievement levels reached an all-time high with an overall success rate of 85%. For those learners on the Advanced Apprenticeship three-year programme, success rates were even higher, at over 98%. PHOTO CAPTION: As part of their exchange visit, S&B Automotive Academy arranged for the German apprentices to visit Hampshire bus operator, Bluestar, at its Barton Park depot. The students are pictured with S&B’s Andy West (3rd right) and Steve Prewett, Bluestar’s Area Engineering Manager (2nd right). Ends http://www.sandbaa.com
  • Donegal to get first Shannon lifeboat in Ireland

    The Royal National Lifeboat Institution in Ireland is to get its first Shannon class boat.
  • Ebola outbreak: West Africa food harvests 'at risk'

    The Ebola outbreak is putting food harvests in West Africa "at serious risk", the UN's Food and Agriculture Organisation (FAO) warns.
  • Reece Shearsmith: A man of many faces

    Actor Reece Shearsmith takes the lead role in the new four-part ITV drama Chasing Shadows - set in a missing persons field unit that hunts serial killers who prey on the vulnerable.