Bloodhound diary: 'Flying Scotsman'
Published: 24th May 2012 14:07:00
A British team is developing a car that will capable of reaching 1,000mph (1,610km/h).
Powered by a rocket bolted to a Eurofighter-Typhoon jet engine, the Bloodhound SSC (SuperSonic Car) vehicle will mount an assault on the land speed record.
Wing Commander Green is writing a diary for the BBC News website about his experiences working on the Bloodhound project and the team's efforts to inspire national interest in science and engineering.
In last month's Bloodhound diary, I outlined the various methods we have for stopping the world's first 1,000mph car - airbrakes, drag parachutes and wheel brakes.
We've had a lot of feedback since then, mostly on the airbrake mechanism - including: how are we going to balance the two hydraulic rams, so that they work together?
The answer is very simple - the pistons are bolted together at the ends, so that they move as one.
Having two pistons gives us an added layer of safety, in case one of the systems develops a leak - and having all the feedback last month means that we're not likely to miss anything important, because someone out there will point it out to us!
I was doing an interview this week by phone with a US journalist, and he asked if I was worried about the huge forces and loads involved in travelling at 1,000mph, particularly on the wheels.
I can see why he asked - the wheels will be doing 177 turns every second, subjecting the wheel rims to some 50,000g.
Clearly a failure at this speed would be catastrophic, so the wheels need to be perfect - and here we've got some great news.
We've just announced a terrific sponsorship deal with Castle Precision Engineering, based in Glasgow, who are going to make all of the car's wheels.
Castle make jet engine fan discs, among many other things - and as a Royal Air Force fighter pilot, this is the sort of technology I can relate to.
The press launch was outside the Scottish Parliament building in Edinburgh - a great place to announce our first major Scottish sponsor (despite the cold and the rain).
This level of support is great news for the Project - one less thing to worry about.
Back to that US journalist's question - am I worried? With companies like Lockheed Martin (UK) doing the wheel design, and world-class experts like Castle building them, Bloodhound is getting the very best of technology and I can have a lot of confidence in it - so, no, I'm not worried. We know that this is going to work.
The manufacture of the lower rear chassis is coming on well, with Hampson Engineering now starting to assemble the various components up in Wigan.
This part of the car will have to take all of the thrust load from the rocket (up to 12 tonnes of thrust) as well as the huge suspension loads, so it needs to be done right.
The upper chassis is proving slightly more challenging. To keep the weight down, we are planning to use titanium panels, but bending them is proving difficult.
Titanium is very susceptible to surface cracking if there are any surface defects - so far we've bent 3 test panels and cracked one.
We're taking some specialist advice and looking for some different titanium alloys, which is the quick way to solve the problem.
If these other titanium alloys prove hard to source, then we can look at other metals, such as aluminium or steel.
However, aluminium expands much faster than steel, so the chassis would try to bend in the desert sun (not a good characteristic) and steel is heavier, and we are trying to avoid adding any more weight to the car - so let's hope that we can find the right grade of titanium.
Meanwhile, our design team down in Bristol is working hard to provide Hyde Engineering with details of the aerodynamic loads on the fin, so that they can complete the design and start to build it.
Once complete, the fin will provide the aerodynamic force to give the car a "positive yaw static margin" - in other words, it will keep the car pointy-end forwards at high speed.
We've now got over 11,000 names on the tail fin - but there's still room for you to add your name and have it travel at 1,000mph!
The aerodynamic design work keeps going, as we learn more about the performance of the car's final shape.
One piece of good news that came out this month was the aerodynamic response to ride height changes - in other words, what happens if the car meets a small rise or dip on the desert surface.
The design ride height for Bloodhound SSC is currently 130mm, from the car's underside to the desert floor.
If the car rises up by 30mm (perhaps due to changes in the desert surface, or the loads on the car), then the downforce on the body will increase by about 1,000kg, pushing the car gently back down again. This is a stabilising aerodynamic force, which we expected it would be, but the confirmation is very good news.
Finally, our surprising fact of the month comes from our website.
BLOODHOUNDSSC.com continues to run up to 10,000 pages a day, with nearly every country in the world following us (we haven't cracked Vanuatu yet, but we're working on it).
The surprise? While you'd expect to hear that the UK and the US are our two biggest audiences, guess where our third biggest following was last month? Slovenia.
So if you're from Slovenia and coming to the UK this summer, then please come and see us at one of the Bloodhound public events - we'd love to say thank you for your support. And if you're not from Slovenia - come and see us anyway!
At 12:58:39 in EnglandA poem about the killing of PC Keith Blakelock during riots in north London was written by the man accused of his murder, a court has heard.
At 12:58:21 in SportKent have announced a pre-interest and pre-tax profit of £156,778 for the financial year to November 2013.
At 12:56:04 in ScotlandA hamster has been found abandoned inside a plastic play tube in Edinburgh.
At 12:55:09 in BusinessThe sometimes fraught relationship between leaseholders and their freeholders is going to be investigated by the Office of Fair Trading (OFT).
At 12:54:04 in HeadlinesIndia's Supreme Court has ordered the continuing detention of businessman Subrata Roy and asked his firm to come up with a plan to repay its investors.
At 12:53:21 in SportCrystal Palace winger Jason Puncheon has been fined £15,000 by the Football Association and warned about his future conduct for Twitter comments he made in relation to former boss Neil Warnock.
At 12:52:43 in HeadlinesA second witness at the murder trial of South African athlete Oscar Pistorius has told a court in the capital Pretoria she was awoken by the sounds of a fight early on 14 February 2013.
At 12:42:01 in PoliticsThere is a risk that "deliberate provocation" could give rise to a dangerous incident in Ukraine, Foreign Secretary William Hague has warned.
At 12:41:48 in EnglandA residential treatment programme for addicts which closed in Yeovil is to reopen after the charity running it merged with another organisation.
At 12:40:03 in ScotlandPolice Scotland has exceeded its target to recruit 1,000 additional officers.
Harvard CitationBBC News, 2012. Bloodhound diary: 'Flying Scotsman' [Online] (Updated 24th May 2012)
Available at: http://www.ukwirednews.com/news/1430720/Bloodhound-diary-Flying-Scotsman [Accessed 9th Mar 2014]
News In Other Categories
Fawlty Towers star Prunella Scales has "a sort of mild Alzheimer's", her husband Tim West has revealed in the Radio Times.
Two hospitals missed opportunities to take action against a consultant breast surgeon who was performing unnecessary or incomplete operations, a review has found.
The sometimes fraught relationship between leaseholders and their freeholders is going to be investigated by the Office of Fair Trading (OFT).